skip to main content
National Training Centres National Training Centres

Our Courses

Delivering training services for the Built Environment and Utility sectors since 2004, we operate from our purpose-built training facilities and regional offices located in Southeast London, the East Midlands and West Yorkshire, with the use of over 100 training centres nationwide.

Contact Us

Novice CPCS Ride on Roller (A31)

Introduction

A Roller's primary purpose is to compact soil, gravel, sand, road surfaces, etc., using vibration, impact loading, kneading, and direct pressure to minimise settlement and remove pockets of air, or air voids, from the compacted material. They are also used to remove moisture from the surface, increasing soil density as a result.

There are fundamental skills and knowledge operators need to know to handle rollers safely, correctly and productively.

This CPCS A31 certification delivers the necessary skills, knowledge, and understanding of safely operating a ride-on roller. It is specifically aimed at plant operators with limited or no experience working with rollers.

Course Outline

A mix of practical and theory-based exercises and tutorials takes delegates through manufacturer information and general knowledge of a ride-on roller. In addition, they’ll participate in practical activities to learn components and functions, best practices and operating methods.

The course reflects national standards and industry best practices and is fully accredited in line with regulations. In addition, choose to learn with Citrus, and delegates will benefit from our custom-built training facilities and customer-first approach.

Our occupationally and technically-experienced trainers coach delegates on this course, completing the session with a practical observation and theoretical post-course assessment. Delegates must pass the examination to qualify for the ​​CPCS Red Trained Operator Card, valid for two years.

Course Programme

This training is essential for workers to operate a ride-on roller safely. Delegates will review legal requirements, ensure safety compliance, and understand procedures and appropriate documentation and classifications.

The course content includes:

  • All pre-start and running checks on a roller
  • Setting the roller for site travel
  • Travelling over different terrain, including undulating ground
  • Manoeuvring in confined areas using forward and reverse direction
  • Setting the roller for compaction duties
  • Compacting differing materials to requirements
  • Compacting up to supported and unsupported edges against a radii
  • All shutdown and secure procedures for roller use
  • Loading and unloading procedures moving on and off a transporter
On Completion

At the end of the training, successful delegates will:

  • Have a working knowledge of the manufacturer’s handbook for the ride-on roller
  • Be able to locate and identify key controls and explain their functions
  • Conduct all pre-operational and running checks following manufacturer's and legislative requirements
  • Be able to prepare a ride-on roller for use and operate the machine safely and efficiently
  • Perform specific loading and unloading tasks and compacting operations as practised throughout the course
  • Confidently carry out all end-of-work and shut down procedures

On successful completion of the course, delegates receive their Red Trained Operator CPCS Card, valid for two years.

Who Should Attend?

This CPCS Ride-on Roller (A31) is for novice Plant Operators who need practical and theory training and assessment. While it is ideal for delegates to have some machinery experience, it is not mandatory. 

Course Duration

This comprehensive course trains delegates to safely and responsibly operate a ride-on roller on and off-site. The training options vary:

Novice training - three days with a maximum of four delegates  

One-to-one and group training options are also available. Please get in touch with our customer team to find out more.

If you require Prep and Test or Test only, click here.

Why Citrus?

We dedicate our efforts to unrivalled quality and the customer experience at Citrus Training, working tirelessly to provide exemplary service to our clients and produce excellent results from our delegates. As a result, we are the leading UK-based provider of health, safety, and technical training and assessment services to the Built Environment and Utility sectors. 

We have over 30 specialist Plant and Lifting trainers and assessors, coaching and testing nationwide to meet any specific needs of our clients. With a wealth of experience and expertise, they have successfully trained over 25,000 delegates across the Plant and NVQ training categories.

Our facilities include six technical centres with the capacity for delivering Plant Training across the UK. And our national, accredited Training and Test Centres are fully equipped to provide CPCS and CSCS accredited courses. In addition, as an approved NPORS training provider, we can also offer on-site training and testing nationwide. 

Finally, as an Approved Training Organisation (ATO) by CITB, we provide quality training that meets the industry-approved standards. 

Things You Need to Know

This CPCS Certifed course has practical elements, so delegates must inform their trainer if they have any serious health issues, physical problems, special considerations or are taking any medication, which may create difficulties in participating.

Delegates must pass their CITB health, safety and environmental touch test within two years of taking their CPCS theory test.

If you are a CITB Levy payer, you can claim a CITB Grant for this course. Once you have booked please contact us with your CITB number and we can assist you in claiming the funds.

Popular FAQ's

Yes - delegates need to have a good understanding of the English language to take the course.

There are practical elements, so delegates should make their trainer aware of any special considerations.

No, you need to take this course and test at an accredited CPCS Test Centre.

No, this is for complete novices; however, any experience they have will be beneficial.

National Coverage

Over 100+ training centres nationwide, with 150+ technical trainers, delivering upwards of 250+ courses to over 40,000+ delegates each year. Thats why we're the UK's trusted training provider.

Industry Insights Report

Industry Insights Report

Join one of the industry’s largest benchmark and insight reports.

Industry Insights Report